GC Rod seal

Operating conditions

 Pressure:     ≤ 400 bar

Temperature: -35°C...+110°C

Speed:         ≤ 0,5 m/s

Fluids:         Hydraulic fluids (mineral oil based)

Gap >e< defined according to operating conditions by using nomogram.

Materials

Parker’s P5008 material is a polyurethane based elastomer (hardness 93 Shore A).

Its main advantages in comparison with other polyurethane materials are increased heat resistance, lower compression set, and enhanced resistance to hydrolysis.

Installation

Can be installed into a closed groove. Seals available for ISO 5597/1 housings.

Advantages

- Especially high wear resistance

- Durable against shock loads and pressure peaks

- High resistance against extrusion

- Low compression set

- Suitable for hardest working conditions

- Sufficient lubrication due to pressure fluid between the sealing lips

- Good sealing performance at zero pressure

- Easy installation

- Seals with a cross-section above 10 mm have a supporting part in the middle of the profile, which increases the stability

Products, € VAT 0%