E8 Pneumatic rod seal

Products 1-12 / 12

Product code	Product name	Price	Unit
80674012000	E8 00606 12 X 22 X 11	15,08	Pcs
80674016000	E8 00606 16 X 26 X 11	13,97	Pcs
80674020000	E8 00606 20 X 30 X 11	20,25	Pcs
80674025000	E8 00606 25 X 35 X 11,5	20,47	Pcs
80674028000	E8 00606 28 X 38 X 11,5	25,79	Pcs
80674030000	E8 00606 30 X 40 X 11,5	31,46	Pcs
80674032000	E8 00606 32 X 42 X 11,5	26,41	Pcs
80674035000	E8 00606 35 X 45 X 11,5	36,44	Pcs
80674040000	E8 00606 40 X 50 X 11,5	29,35	Pcs
80674050000	E8 00606 50 X 60 X 12,5	42,93	Pcs
80674062500	E9 00606 25 X 35 X 8,5	45,07	Pcs
80674061200	E9 00606 12 X 22 X 8,5	21,51	Pcs

Products 1-12 / 12

Operating conditions

Pressure: ≤ 16 bar

Temperature: -20°C...+80°C

Speed ≤ 1 m/s

Medium: Oil lubricated air, dry air (cylinder should be permanent lubricated during installation)

Materials

U-ring: PDF’s NBR based special material

Wiper / Fastener: PDF’s wear resistant plastic

Installation

Seal/wiper set E8 can be installed in to Din 7993 type B circlip locked housings. The wiper ring EA locks the complete set into the sealing groove. The sealing set can easily be replaced even with the piston rod installed. Ask for instructions on dimensioning the housing if needed.

Advantages

- No danger of corrosion as the combined fixing/scraping part renders additional circlips etc. unnecessary

- If only one scraper is required, the fixing/scraping part profile EA may be used without the sealing part. Modification of the housing is not required.

- Low friction and long lifespan due to special compound and lip geometry

E8 Pneumatic rod seal

Products 1-12 / 12

Products 1-12 / 12

Products, € VAT 0%