BS Rod seal

Products 1-20 / 80

Product code	Product name	Price	Unit
80670008000	BS P5008 8 X 16 X 5,7	23,24	Pcs
80670009000	BS P5008 9 X 16 X 5,7	26,32	Pcs
80670010000	BS P5008 10 X 17 X 5,7	26,32	Pcs
80670010500	BS P5008 10 X 18 X 5,7	26,32	Pcs
80670016000	BS P5008 16 X 24 X 5,8	26,80	Pcs
80670016200	BS 16 X 26 X 7,3 PU	26,80	Pcs
80670017500	BS P5008 17,5 X 22,5 X 4	26,32	Pcs
80670022000	BS P5008 22 X 32 X 7,3	29,27	Pcs
80670028000	BS P5008 28 X 36 X 7	29,89	Pcs
80670031800	BS P5008 32 X 42 X 7,3	30,63	Pcs
80670009500	BS PU 10 X 16 X 4,5	26,32	Pcs
80670012700	BS PU 12,7 X 19,05 X 4,5	27,41	Pcs
80670013500	BS P5008 14 X 22 X 5,7	26,32	Pcs
80670014000	BS 14 X 24 X 7,3 RSB PU	26,32	St
80670020000	BS P5008 20 X 30 X 7,3	28,18	Pcs
80670025000	BS P5008 25 X 33 X 6,5	29,27	Pcs
80670025200	BS P5008 25 X 35 X 7,3	29,27	Pcs
80670026000	BS P5008 26 X 36 X 10	29,48	Pcs
80670028200	BS P5008 28 X 38 X 7,3	29,89	St
80670030000	BS P5008 30 X 40 X 10	30,64	Pcs

Products 1-20 / 80

Operating conditions

Pressure: ≤ 400 bar

Temperature: -35C...+110C

Speed: ≤ 0,5 m/s

Fluids: Hydraulic fluids (mineral oil based)

Gap >e< defined according to operating conditions by using nomogram.

Materials

Parker’s P5008 material is a polyurethane based elastomer (hardness 93 Shore A).

Its main advantages in comparison with other polyurethane materials are increased heat resistance, lower compression set, and enhanced resistance to hydrolysis.

Installation

Installation into closed groove.

Seals available for ISO 5597/1 housings

Advantages

- Especially high wear resistance

- Durable against shock loads and pressure peaks

- High resistance against extrusion

- Low compression set

- Suitable for hardest working conditions

- Sufficient lubrication due to pressure fluid between sealing lips

- Increased sealing performance at zero pressure

- Air penetration from outside is largely prevented

- Easy installation

BS Rod seal

Products 1-20 / 80

Products 1-20 / 80

Products, € VAT 0%