GC Rod seal

Products 1-20 / 72

Product code	Product name	Price	Unit
80670406000	GC P5008 6 X 14 X 5,7	18,62	St
80670408000	GC P5008 8 X 16 X 5,7	20,47	Pcs
80670412000	GC P5008 12 X 19 X 5	30,64	St
80670420000	GC P5008 20 X 26 X 5	20,78	Pcs
80670420100	GC P5008 20 X 28 X 5,7	22,19	Pcs
80670422100	GC P5008 22 X 30 X 5,7	22,93	Pcs
80670422300	GC P5008 22 X 30 X 7	24,04	St
80670425100	GC 25 X 33 X 8	28,22	St
80670427900	GC P5008 28 X 36 X 7	28,22	Pcs
80670405000	GC P5008 5 X 9 X 3	18,62	St
80670412100	GC P5008 12 X 20 X 5,7	36,81	St
80670414000	GC P5008 14 X 21 X 5	20,01	Pcs
80670416000	GC PU 16 X 24 X 5,7	21,09	Pcs
80670418000	GC P5008 18 X 25 X 5	23,25	St
80670418100	GC P5008 18 X 26 X 5,7	21,56	St
80670422500	GC (BS) P5008 22 X 32 X 8	30,64	St
80670424000	GC P5008 24 X 32 X 6	30,64	St
80670425000	GC P5008 25 X 33 X 5,7	22,93	Pcs
80670425400	GC PU 25,4 X 31,5 X 4,2	29,65	St
80670425500	GC P5008 25,4 X 33,45 X 5,7	29,65	St

Products 1-20 / 72

Operating conditions

Pressure: ≤ 400 bar

Temperature: -35°C...+110°C

Speed: ≤ 0,5 m/s

Fluids: Hydraulic fluids (mineral oil based)

Gap >e< defined according to operating conditions by using nomogram.

Materials

Parker’s P5008 material is a polyurethane based elastomer (hardness 93 Shore A).

Its main advantages in comparison with other polyurethane materials are increased heat resistance, lower compression set, and enhanced resistance to hydrolysis.

Installation

Can be installed into a closed groove. Seals available for ISO 5597/1 housings.

Advantages

- Especially high wear resistance

- Durable against shock loads and pressure peaks

- High resistance against extrusion

- Low compression set

- Suitable for hardest working conditions

- Sufficient lubrication due to pressure fluid between the sealing lips

- Good sealing performance at zero pressure

- Easy installation

- Seals with a cross-section above 10 mm have a supporting part in the middle of the profile, which increases the stability

GC Rod seal

Products 1-20 / 72

Products 1-20 / 72

Products, € VAT 0%