Shaft seals - FPM (Viton) | Shaft Seals

Products 461-480 / 533

Product code	Product name	Price	Unit
80613519000	A 180 X 215 X 15 FPM	511,00	Pcs
80613518160	AS (CCS) 180 X 215 X 16 FPM	505,40	Pcs
80613519500	A 180 X 220 X 15 FPM	425,10	Pcs
80613519785	A 185 X 215 X 16 FPM	470,70	Pcs
80613519800	A 190 X 220 X 12 FPM	421,00	Pcs
80613520100	A 190 X 220 X 15 FPM	442,20	Pcs
80613520300	AS 190 X 220 X 15 FPM	487,70	Pcs
80613529000	GR 200 X 230 X 15 FPM	564,50	Pcs
80613529100	A 200 X 230 X 15 FPM	484,80	Pcs
80613529300	AS 200 X 230 X 15 FPM	564,50	Pcs
80613530000	GR 210 X 240 X 15 FPM	515,40	Pcs
80613530500	AS 210 X 240 X 15 FPM	564,50	Pcs
80613531500	C 215 X 250 X 16 FPM	744,30	Pcs
80613531800	A 215 X 250 X 16 FPM + SS	744,30	Pcs
80613532000	GR 220 X 250 X 15 FPM	612,30	Pcs
80613532200	A 220 X 250 X 15 FPM	521,40	Pcs
80613532300	AS 220 X 250 X 15 FPM	562,60	Pcs
80613533000	C 225 X 270 X 16 FPM	744,30	Pcs
80613534000	A 230 X 260 X 15 FPM	652,20	Pcs
80613534500	GR 230 X 260 X 15 FPM	652,20	Pcs

Products 461-480 / 533

Materials

Rubber material: Fluorocarbon rubber (FPM)

Body: Steel DIN 1624

Spring: Steel T304

Operating conditions

Temperature: -20°C...+200°C (momentary +220°C)

Pressure: Approx. 1 bar

Surface speed: Max. approx. 15 m/s.

Maximum surface speed must be reduced approx:

- 1/3 if good grease lubrication

- 1/5 if seal with dust lip

- 1/3 if sealing lip without spring

- 1/2 if two sealing lips with spring (e.g. R-duo)

Attention!

GR-seal for demanding conditions is FPM coated also from the inside. This makes it available for use at high temperatures and with chemically aggressive substances.

WARNING! Burned FPM-rubber must be handled like corrosive substances.

Additional information:

Material Safety Data Sheet:

Shaft seals - FPM (Viton)

Products 461-480 / 533

Products 461-480 / 533

Products, € VAT 0%